Rapid Mixer and Wet Granulator are used to perform dry mixing and wet granulation at same time in the same bowl. There are two impellers inside the RMG bowl. Main impeller runs in horizontal plane and chopper /granulation impeller runs in vertical plane. RMG produces a highly efficient, fast & gives superior results in homogenous mixing & granulation of material All process contact parts like bowl, chopper etc.,are in AISI SS 316, with high pharmaceutical finish & other non contact parts like staircase / railings are in AISI SS 304. The process is fully dust free and automated with the help of PLC including its Discharge etc.

 
Special Characteristics of our Rapid Mixer Granulator (RMG):

• Air purged shaft seals eliminating powder entering the seal.
• Built in cleaning system for both shaft seals .
• Can be provided with loading & unloading units to form an assembly line & reduce material handling (Optional feature)
• In Compliance with cGMP Norms/ guidelines.
• Aseptic, hygienic system designs
• In Compliance with FDA regulations.
• Intrinsically safe Earth / electrical system generated due to static charge
• Validation documents provided like DQ, IQ/OQ, FAT/ SAT
• All product process area of the equipment is in AISI 316/ 316L stainless steel, mirror polish.
• Stainless steel and pressurized control panel.
• Microprocessor based control panels
• Online sampling port.

MERITS

• Suitable for mixing of dry/wet material
• All contact parts in AISI SS 316/ 304
• Efficient & uniform mixing
• Tilting arrangement, reversible switch and safety switch provided
• Capacities range from 50 kgs to 500 kgs per batch
• cGMP Construction With High Pharmaceutical Finish With Documentation

MERITS

• Standard/cGMP construction Models available.
• All contact parts in AISI SS 316/ 304 like feeding Hoper, Beater, processing chamber etc.
• Output: 50kg-300kg/hr depending on product & reduction size required.
• Capacity from 1H.P. to 5H.P.
• Multi speed drive for various product grinding.
• Direct Drive/ Belt Free Drive possible for pharma Application
• Easy dismantling and cleaning.
• High degree of surface finish.
• cGMP construction

SHIVSHAKTI Micro Pulveriser is compact, low cost, highly efficient grinding mill, capable of grinding variety of products from coarse to fine mesh size.  Material to be pulverized is crushed between high speed moving beaters & serrated liner & by impact between rapidly moving beaters & the particle itself, the energy of the rapidly moving beaters dissipating itself into the particles being ground by virtue of their inertia, thus causing the particles size reduction.

 
Merits

• Capable of wet grinding
• Consumes very less space
• Easy to clean,
• Dust proof operation
• Low maintenance
• Low Power

Vibro Sifter find application in Separation of solids from solids/ liquid & grading of materials as per product mesh size. The range of Vibro Sifters that we offer are of high pharmaceutical finish made to cGMP Constriction.

MERITS

Sizes available in 12”, 20", 30", 36", & 48"
High degree of pharmaceutical finish.

• Double Decker arrangement can be provided.
• Easy dismantling and cleaning.
• MOC SS 304 / 316 / 316L
• Modular Design Of Decks With Easily Fitted Clamps
• Dust Free Arrangement, Lead Free Sieves available
• Output 50 To 200 Kgs/Hr Depend Upon Characteristic Of Material
• Silicon Moulded Sieve available
• cGMP Construction with documentation

Merits

• Suitable Exhaust Blower Available Heaters & Blower Motor Is Electrically Interlocked & enclosed in enclosure
• MOC SS 304 / 316 / 316
• Angle Inclination Of 45 Degree And Can Be Adjusted As per Requirement
• cGMP Construction With High Pharmaceutical Finish With Documentation.
• Spray system with pressure tank and spray gun.
• Peristaltic pump for metered dozing.
• Exhaust blower as optional
• Our products are available in different size range from 12, 24, 36, 42, 48, 60 to 72 inches